Face light button edge writing
This is stainless steel luminous character produced by GuangZhou bendo. In the luminous character market, stainless steel LED luminous character is the most commonly used. It has energy saving and environmental protection, high brightness, long life and low maintenance cost, but its production process is not simple. The first step is to use a laser cutting machine to cut the literal of the basic font, and the use of laser cutting process can make the font accurate, not out of shape, cutting lines are more smooth, more beautiful, and the transition is more natural. The second step is to cut the edge thickness according to the thickness of the word. Saw Angle, font spacing measurement, positioning accurate cutting in place. The third step is to weld the perimeter. Solder or argon welding according to the actual situation. High-quality tin welding should ensure that there are no protruding small tin blocks or small solder beads at the tin joints to ensure that the subsequent panel is installed smoothly (to ensure that there is no light leakage); Argon welding should ensure that it does not burn and burn through the mirror material around the edge. The fourth step is the bottom plate welding, the bottom plate material can choose stainless steel, galvanized iron sheet or snow plate as the bottom plate. Step 5: Polish and polish. The welding joint is further processed to make the welding line surface more smooth and beautiful. The non-welded parts are also polished at the same time so as not to affect the overall finish. Step six, install LED lights. LED lights should be evenly distributed on the bottom plate. To ensure that the lamp distribution is uniform, the wire connector should be firm, and the LED lamp should be added with silicone to prevent falling off. The seventh step is to glue the buckle of the acrylic panel. Make sure that the panel and the buckle are glued in place and smooth. In order to ensure that there is no light leakage and no water seepage, it is necessary to use neutral silicone sealing panel and the contact of the buckle edge can play a waterproof role, so that our stainless steel luminous word is roughly completed, bendo has a strict set of control standards for each product, each operation step, and complete customer needs. bendo is responsible for the customer as well as the product