Mirror stainless steel three-dimensional letters

This is a metal backlit luminous character produced by GuangZhou bendo. It has the characteristics of high strength, corrosion resistance, long life, etc., and can be used outdoors for a long time. Its production process is not simple, the first step to use the laser cutting machine to cut out the basic font panel, the use of laser cutting process can make the font accurate, not out of shape, cutting lines more smooth, more beautiful, more natural transition. The second step is to cut the edge thickness according to the thickness of the word. Saw Angle, font spacing measurement, positioning accurate cutting in place. The third step is to weld the perimeter. Solder or argon welding according to the actual situation. High-quality tin welding should ensure that there are no protruding small tin blocks or small solder beads at the tin joints to ensure that the subsequent panel is installed smoothly (to ensure that there is no light leakage); Argon welding should ensure that it does not burn and burn through the mirror material around the edge. The fourth step is the panel welding, the bottom material can choose acrylic or crystal plate as the bottom plate. Step 5: Polish and polish. The welding joint is further processed to make the welding line surface more smooth and beautiful. The non-welded parts are also polished at the same time so as not to affect the overall finish. Step six, install LED lights. LED lights should be evenly distributed on the panel. To ensure that the lamp distribution is uniform, the wire connector should be firm, and the LED lamp should be silicon solid to prevent falling off. The seventh step is to glue the buckle of the acrylic bottom plate. Make sure that the panel and the buckle are glued in place and smooth. In order to ensure that there is no light leakage and no water seepage, it is necessary to use neutral silicone sealing panel and the contact of the buckle edge can play a waterproof role, so that our metal backlight luminous characters are roughly completed. bendo has a strict set of control standards for each product and each operation step, so as to do a good job of products and complete customer needs. bendo is responsible for the customer as well as the product.